Canadian how to change your Cycle or Jurisdiction - Mobile App

Canadian How to change your Cycle or Jurisdiction- Mobile App

Overview

Changing your cycle or jurisdiction may occur throughout your day if you are travelling across the US/Canada border or moving between north and south of 60 rules.

We will review how to complete both Cycle and Jurisdiction changes within the BigRoad ELD Mobile app.

Key Requirements

When switching between cycles and jurisdictions you must still do the following:

• Comply with the mandatory off-duty reset time before switching cycles.

How to Change your Cycle/Jurisdiction

To change cycle or jurisdiction please follow the below steps:

1. From the BigRoad ELD Mobile app Home page tap ‘Logs’

2. Tap ‘Rules’

3. Select the Cycle field

4. From the drop-down select the cycle or Jurisdiction you wish to change to

5. You will now see a prompt explaining the new duty/driving hour limitations a. Select Confirm to accept the changes

b. Select Cancel to remain on the current cycle/jurisdiction or select a different one

6. All duty status counters will be updated

Note: If you attempt to change your cycle and have not complied with the required cycle reset you will receive on-screen prompt advising of an ‘Invalid Cycle Switch.’

How to accept the Cycle/Jurisdiction change

If your Safety Manager has requested to change your Cycle or Jurisdiction on your behalf you will need to accept or decline the suggestion.

To accept the Cycle/Jurisdiction change you will need to follow these steps:

1. From the Menu bar at the bottom click the Logs button

a. There will be a Green Dot on this button indicating a suggested change

2. Click the Alert saying Cycle change Confirmation

3. Tap Confirm to accept the change or Cancel to remain on the current cycle

4. Once confirmed all HOS rules and availability counters will be updated

Cycle/Jurisdiction change log events

All cycle and jurisdiction changes are recorded under ‘Events’ as auto-recorded Dashlink events.

They can be found on the Mobile app in your Events on the daily log.

• If both cycle and jurisdiction changes are requested in 1 request, then both Jurisdiction and cycle change events will be recorded

• If only a cycle change is requested, then only cycle change will be recorded